Silvercrest Z30914 - Manual (Page 15)

GB 14
Preparing for use
CAUTION! Use the above-indicated battery types only. Failure to
observe this advice may result in damage to the product.
Receiver:
Remove the battery compartment cover 9 from the back of the
device.
Remove the used batteries, if present.
Insert 2 batteries (1.5 V
, type AA).
Note: Ensure correct polarity. This is indicated in the battery
compartment
10 .
Close the battery compartment 10 .
Transmitter:
Remove the holder 15 from the back of the transmitter.
Open the battery compartment 14 by turning the battery compartment
cover anticlockwise.
Insert a battery (3 V , type CR 2032). The side marked “+” must
face upwards.
Place the battery compartment cover on the battery compartment 14
and tighten it by turning it clockwise.
Fasten the holder 15 of the receiver back on to the back of the device.
30.06.11 15:47