Solid cooking fats – Silvercrest SKF 2300 B2 User Manual

Page 73

SKF 2300 B2

6) Carefully replace the frying basket 3 into the deep fryer.

7) Close the appliance lid. This must click in audibly.

8) Push the handle locking button w downwards. The handle now allows itself

to be lowered. The frying basket 3 is at the same time lowered into the hot
oil or fat.

NOTICE

►

The frying process can be overseen through the viewing window r in the
appliance lid.

Solid Cooking Fats

To avoid a spraying of the fat and that the appliance becomes too hot, please
take the following precautions when using solid frying fat:

■

When replacing old fat with fresh, ﬁ rst melt the fresh blocks of fat slowly,
under low heat, in a separate pan. Then carefully pour the molten fat into
the deep fryer. When this has been done, insert the plug into a mains power
socket and switch the deep fryer on.

■

After use, store the deep fryer with the solidiﬁ ed fat at room temperatures.

Should the fat become too cold, it could cause splattering on remelting! To avoid
this, poke a few holes into the solidiﬁ ed fat with a wooden or plastic spatula.
Ensure that no damage is caused to the heating element.

■

To melt the fat, switch the appliance on with the On/Oﬀ switch 0 and then
adjust the temperature regulator 8 to 130˚C. The control lamp integrated
into the On/Oﬀ switch 0 starts to glow.

■

Wait until all of the fat has melted. Thereby, the green indicator light 9 can
intermittently light up and go out. First set the desired frying temperature
when all of the fat has melted.

IB_75818_SKF2300B2_LB2.indb 70

27.08.12 11:22