Silvercrest SSM 600 A1 - Manual (Page 8)

6 GB
2. Immerse the blend-
er 8 in the food to be
puréed or mixed.
3. To purée, keep the On/Off switch “I“ 3 or
“II“ 4 pressed down. Move the blender 8
up and down slightly so that the food is
processed evenly.
4. When you have finished, release the
On/Off switch 3/4.
NOTE: If the blender 8 sucks onto the base
of the container, briefly release the On/Off
switch 3/4.
5. Cleaning
DANGER! Pull the mains plug 2
from the socket before cleaning
the hand blender.
• Do not immerse the motor part 5, the
mains cable or the mains plug 2 in
water or any other liquid.
• When washing in the sink, the water
should be clear enough for the blade to
still be visible.
WARNING! Do not use harsh or abrasive
cleaning agents.
• If necessary, wipe the motor part 5 and
the mains cable 2 with a slightly damp
cloth.
• The blender 8 can be washed by hand.
• Leave all parts to dry completely before
you tidy them away.
A few tips on cleaning
• Clean the blender 8 as soon as possi-
ble after use so that the food residue
does not dry on.
• Whenever processing very salty foods,
wash the blender 8 at once.
6. Wall mounting and
storage
DANGER! Store the motor part 5
and the blender 8 out of the reach
of children.
• To prevent accidents, the mains plug 2
must not be conntected to a socket
during storage.
• Choose a place where neither heat nor
moisture can affect the appliance. Do
not fix the wall mount 10 over a sink or
hob plates.
• The wall mount 10
can be fixed to the
wall with the en-
closed fixing materi-
al. The fixing materi-
al is suitable for
standard, solid ma-
sonry. It may be nec-
essary to use some-
thing else for other
walls.
• Put the motor part 5 together with the
blender 8 and hang them in the wall
mount 10.
• Store the mains cable 2 in the retain-
er 9.
__RP66867_B6.book Seite 6 Donnerstag, 5. Mai 2011 11:24 23