Gb extension nozzle, Assembling the squeegee, Upholstery nozzle – Silvercrest SDR 900 A1 User Manual
Page 15
12
SDR 900 A1
GB
Extension nozzle
Push the extension nozzle
10
on to the steam nozzle
6
as far as the stop .
The marking line on the extension nozzle
10
and the marking line on the
appliance must be aligned with each other (see fold-out page Figure A).
Turn anticlockwise until both marking lines on the extension nozzle
10
are
aligned with both marking lines on the appliance. The extension nozzle
10
remains locked in this position (see fold-out page Figure B).
NOTE
►
The fi xture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
extension nozzle
10
.
■
The extension nozzle
10
is removed in the reverse order.
Assembling the squeegee
Remove the upholstery nozzle
14
and place this together with the two
brackets onto the squeegee attachment
13
.
Then press the upholstery nozzle
14
under the mount of the squeegee
attachment
13
(see fold-out page).
Upholstery nozzle
Push the upholstery nozzle
14
on to the steam nozzle
6
as far as the stop.
The marking line on the upholstery nozzle
14
and the marking line on the
appliance must be aligned with each other (see fold-out page Figure A).
Turn anticlockwise until both marking lines on the upholstery nozzle
14
are
aligned with both marking lines on the appliance. The upholstery nozzle
14
remains locked in this position (see fold-out page Figure B).
■
A cotton cover
15
is supplied for use with the upholstery nozzle
14
. This can
be used for the cleaning of sensitive surfaces, such as sofas and armchairs.
NOTE
►
The fi xture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
upholstery nozzle
14
.
■
The upholstery nozzle
14
is removed in the reverse order.
IB_103808_SDR900A1_LB4.indb 12
IB_103808_SDR900A1_LB4.indb 12
10.11.14 08:49
10.11.14 08:49