Areas of application, Fitting/removing attachments, Gb mt – Silvercrest SDR 900 A1 User Manual
Page 62: Extension hose
59
SDR 900 A1
GB
MT
Areas of application
You can clean either by using steam directly from the steam nozzle
6
or you
can fi t an accessory.
■
Do not use an accessory if you want to clean items such as toilets and sinks,
taps and drains, windows, furniture, fabrics, shutters or mirrors.
You can easily remove water and dissolved dirt from smooth surfaces after
cleaning using the squeegee attachment
13
.
NOTE
►
The closer you hold the steam nozzle
6
to the surface to be cleaned, the
better the eff ect. The steam pressure and temperature are at their highest
directly after leaving to the steam nozzle
6
.
►
Stubborn stains and dirt must be soaked with water beforehand.
■
Use the angle nozzle
12
for tight corners or joints, or hard-to-reach places.
■
Use the round brush
11
for stubborn soiling, for example, on wheel rims.
Fitting/removing attachments
WARNING! RISK OF INJURY!
►
Always remove the plug from the mains power socket before you fi t/remove
an attachment.
►
Wait until the appliance has cooled down before you fi t/remove an attach-
ment.
►
Wait until all of the steam has dissipated before you fi t/remove an attach-
ment.
Extension hose
Push the extension hose
9
on to the steam nozzle
6
as far as the stop.
The marking line on the extension hose
9
and the marking
line on the appliance must be aligned with each other
(see fold-out page Figure A).
Turn anticlockwise until both marking lines on the extension hose
9
are
aligned with both marking lines on the appliance. The extension hose
9
remains locked in this position (see fold-out page Figure B).
NOTE
►
The fi xture on the appliance has a joint so that the attachment can be
aligned to the best usage position. This is, however, not possible with the
extension hose
9
.
■
The extension hose
9
is removed in the reverse order.
IB_103808_SDR900A1_LB5.indb 59
IB_103808_SDR900A1_LB5.indb 59
10.11.14 08:52
10.11.14 08:52