Silvercrest SFR 2.4 B1 User Manual
Page 88
SilverCrest SFR 2.4 B1
86
English
Before Getting Started
Connecting the Transmitter Cradle
To connect to hi-fi equipment, use one of the supplied audio cables (see page 77 – “Package
Contents”).
1. Connect one end of the audio cable to the audio input socket (14).
2. Connect the other end of the cable to the headphones output socket of your hi-fi equipment.
If your hi-fi equipment has a 6.3 mm jack socket, connect the adapter plug (see page 77 –
“Package Contents”) to the audio cable.
You may also connect the adapter cable (see page 77 – “Package Contents”) to the cable
to use the Cinch audio outputs of your hi-fi equipment.
3. Plug the small plug at the cable end of the mains adapter into the power socket (15).
4. Plug the power adapter into a wall outlet.
5. Turn on the transmitter cradle. See page 88 – “Powering the Transmitter Cradle On”.
As soon as you connect the power adapter to the transmitter cradle and the
mains, the transmitter cradle power indicator (18) lights up green. This is
independent of the position of the On/Off switch (12).
Only use the power adapter indoors.