Silvercrest SUR 46 A1 - Manual (Page 15)

15 GB
Before Initial Use / Operation
j Insert the mains plug 12 into a power socket. The number 180
3 Min
(180 seconds) appears in the display 2 as standard.
m
Important! Ensure that the mains voltage is 220 -240 V! (See the
type plate on the underside of the device). The device might
otherwise be damaged.
Q
Operation
Important! Fittings, stickers and decorations that are loosely at-
tached to objects, as well as other loose parts, e.g. screws on / in
spectacles, may become detached during the cleaning process.
You should therefore clean such items not more than once a month.
Note: The On-switch “ON” 1 and the Off-switch “OFF” 3 simply
control the time interval of the timer or the cleaning process. The actual
switching on and off of the device is controlled by the mains plug
12 .
Q
Cleaning without the Insert
j Ensure that the device is disconnected from the mains supply.
j Open the lid 5 manually.
j Place the object to be cleaned into the stainless steel tank 7 .
j Then fill the stainless steel tank 7 with normal tap water.
j The liquid must cover the object that is to be cleaned, but must not
exceed the mark indicating the maximum filling height.
j If the stainless steel tank 7 overflows, wipe off the outside of the
device immediately until dry.
m
Important! Never use the ultrasonic cleaning device without
water as the device may be damaged!