Safety instructions – Silvercrest SUR 46 A1 User Manual
Page 11
11
GB
Safety Instructions
- before you clean the device,
- if you are not going to use the device for a prolonged period,
- after every use.
J
You should pull on the mains plug directly and not on the lead.
J
If you find there is damage to the lead, mains plug, housing or
other parts of the device, the device must not be used.
J
Repairs should only be carried out by a specialist dealer.
J
If the device’s mains lead is damaged, the lead must be replaced
by the manufacturer, his customer services centre or a suitably
qualified person, in order to avoid causing further danger.
c
WARNING! DANGER OF ELECTRIC SHOCK! If the device
has fallen into water, it is essential to remove the mains plug from
the socket first before you put your hands into the water.
c
WARNING! DANGER OF ELECTRIC SHOCK! Never touch
the mains plug with wet hands, particularly when you insert it into
or remove it from the socket.
J
The installation of an earth leakage circuit breaker device with a
rated tripping current of not more than 30 mA offers further protec-
tion against an electric shock. The installation should only be
carried out by a specialist electrician.
J
Please ensure that the lead does not become caught in
cupboard doors or pulled across hot surfaces. Other-
wise the insulation of the lead may be damaged.
Q
Please observe the following in
order to avoid a fire
J
Remove the mains plug after use or before cleaning the device.
J
Never operate the device unsupervised and only in accordance
with the information on the type plate.
J
Remove the mains plug from the socket