Silvercrest SPUV 90 A1/SPUH 90 A1 - Manual (Page 62)

Wakening with the alarm tone
When the alarm time is set correctly, as described above:
1. Repeatedly press the button AL1
y resp. AL2 u until the symbol for the
alarm tone appears in the display j . At the programmed time the
alarm tone will now switch itself on.
2. Press the button o to switch the alarm tone off until the following day.
3. To deactivate the alarm function, repeatedly press the button AL1 y resp.
AL2 u until a symbol is no longer shown next to the indicator for the
alarm function resp. in the display j . After about 5 seconds the
device returns to just a time display and the indicator for the alarm
function disappears.
Snooze Function
Activation of the button SNOOZE e interrupts the alarm tone or the radio
for about 10 minutes. After these 10 minutes the alarm procedure is repeated.
• Press the button
o to switch the alarm function off until the following
day.
- 60 -
IB_71140_SPUV90A1_LB5.qxd 28.11.2011 9:02 Uhr Seite 60