Silvercrest SFK 36 A1 User Manual

Page 10

- 8 -

Synchronising the transmitter and receiver

The transmitter and receiver of this doorbell system can com-

municate with each other on a variety of different frequencies.

Consequently, up to 5 transmitters can be operated with one

receiver. The precondition for this is that the transmitter and

receiver within a system are working on the same frequency.

For this, you must synchronise the appliances as follows:

Press the synchronisation button on the receiver

Now press the bell button

s on the transmitter.

If the synchronisation has been a success, the receiver notifies

you of the programmed call signal. The appliances terminate

the synchronisation mode and the signal indicator q goes

out. Should the receiver not react as described, repeat the

synchronisation.

The transmitter shows, with a brief glowing of the indica-

tor f when being activated, the transmission of the signal

to the receiver.

LB_PL_CZ.indb 8

09.12.2011 9:47:48 Uhr