Silvercrest SFK 36 A1 User Manual

Page 11

- 9 -

Installing the appliance

Select a suitable positioning for the transmitter, close to

your outer door.
Using the assembly plate

of the transmitter, mark the

positions required for the two boreholes (spacing approx.

68 mm) and then bore the holes for the enclosed wallplugs.
Screw the assembly plate

onto the wall.

Write the name(s) of the residents on the nameplate

and then place the plastic covering.
Place the transmitter on the assembly plate

and

secure it, with the enclosed small screw, to the assembly

plate h.
You can install the receiver at a suitable location either

suspended by its loop r or make use of the stand o.

Bear in mind that the given range refers to the free-space

range. If being utilised in a building, this range is reduced

quite distinctly.
To suspend the receiver, fix the enclosed screw, with the

wallplug, at a suitable location on the wall and hang the

appliance from it.

LB_BG_GR_CY.indb 9

09.12.2011 9:43:52 Uhr