Silvercrest SCAW 5.00 B2 - Manual (Page 333)

SilverCrest SCAW 5.00 B2
English - 331
Date Stamp
This function allows you to show the date and time of the recording in the bottom right corner
of a video.

Use the right or left navigation button (6) to select the icon.

Press the centre navigation button (6) to confirm your selection.
The following settings are available:
Disables the date stamp.
Enables the date stamp.

Use the right or left navigation button (6) to select the setting you want.

Press the centre navigation button (6) to confirm your selection.
After the date stamp has been enabled, it is not possible to remove it from
the recording. You should therefore check if the date and time are properly
set prior to recording.
Pre-record
If this function is enabled, recording starts 3 seconds before you press the Record button (7)
to start recording.

Use the right or left navigation button (6) to select the icon.

Press the centre navigation button (6) to confirm your selection.
The following settings are available:
Disables the Pre-record function.
Enables the Pre-record function.

Use the right or left navigation button (6) to select the setting you want.