Silvercrest SCAW 5.00 B2 - Manual (Page 320)

SilverCrest SCAW 5.00 B2
318 - English

Use the right or left navigation button (6) to select the icon.

Press the centre navigation button (6) to confirm your selection.
The following settings are available:
Does not apply any changes.
Resets the device to the factory-default values.

Use the right or left navigation button (6) to select the setting you want.

Press the centre navigation button (6) to confirm your selection.
Auto power off
You can get the device to power off automatically after a certain time to save battery. If no
buttons are pressed during the preset time, the device powers off automatically. To switch the
camcorder back on, press the On/Off button (12).

Use the right or left navigation button (6) to select the icon.

Press the centre navigation button (6) to confirm your selection.
The following settings are available:
Auto PowerOff disabled
Power off after 1 minute
Power off after 5 minutes

Use the right or left navigation button (6) to select the setting you want.

Press the centre navigation button (6) to confirm your selection.