Edimax Technology EW-7126 - Manual (Page 18)

Parameter Description
Preamble Mode The preamble defines the length of the CRC block for
communication among the wireless stations. There are three
mode including Long, Short and Auto. High network traffic areas
should use the shorter preamble type. If “Auto“ mode is selected,
the card will auto switch the preamble mode depending on the
wireless stations which the card is connecting to.
Note that the parameter is only active in the Ad Hoc operation
mode.
Show Icon in System Tray Enable or disable the icon shown in the system tray.
Radio Off When the setting is checked, the wireless connection of the card
will be disabled.
Power Save
•
CAM(Continuous Access Mode) – This card will always set
in active mode.
•
Max – Enable the card in the power saving mode when it is
idle.
•
Fast – Enable the card in the power saving mode when it is
idle, but some compoents of the card is still alive. In this
mode, the power consumption is larger than “Max“ mode.
Rescan Button Click this button to scan the wireless network which the card is
connecting to.
3.4 Status
This screen shows the information of manufacturer, driver version, settings of the wireless
network the card is connecting to, linking time and link status. If you don’t ensure the status
of the card and the network you are connecting, please go to the screen for more details.
13