Silvercrest SBB 850 A1 - Manual (Page 13)

- 11 -
Baking moulds and kneading paddles
The surfaces of the baking moulds
and knea-
ding paddles
have a non-stick coating. When
cleaning the appliance do not use aggressive
detergents, cleaning powders or objects that may
cause scratches to the surfaces.
Due to moisture and vapours the surfaces of
various parts may undergo changes in their appea-
rance over a period of time. This has no influence
on the function nor does it reduce the quality of the
baking results.
Before cleaning, take the baking moulds
and
kneading paddles
out of the baking area. Wipe
the outside of the baking moulds
with a damp
cloth.
Important!
Never submerse the baking mould
in water or
other liquids.
Clean the interior areas of the baking mould
with
warm soapy water.
If the kneading paddles
are encrusted and it is
difficult to dissolve, fill the baking mould
with hot
water for approx. 30 minutes.
If the mountings of the kneading paddles
are
clogged, you can clean them carefully with a wooden
toothpick.
Do not use any chemical cleaning agents or solvents to
clean the Bread Baking Machine.
Technical data
Model: Bread Baking Machine
SBB 850 A1
Nominal voltage: 220-240 V ~ / 50 Hz
Power consumption: 850 Watt
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
IB_69294_SBB850A1_LB4 12.08.2011 13:16 Uhr Seite 11