Functions of the foot bubble bath, Operation, Setup – Silvercrest SFB 120 B2 User Manual

Page 9: Fitting the attachment for the centre console

SFB 120 B2

Functions of the Foot Bubble Bath

This Foot Bubble Bath has 4 functions available which can be used in various
combinations :

–

1. Bubbles:

Air emerging from the air-jets 4 provides for the
formation of air bubbles, which gently and pleasantly
massage the feet.

–

2. Heat:

The foot pad heats itself and thus provides for a constant
water temperature.

–

3. Massage:

The foot accessories with massage nubs create through
vibration a pleasant massage eﬀ ect.

–

4. Infrared light: The infrared light warms the feet, thus promoting blood

circulation.

Operation

Setup

♦

Place the Foot Bubble Bath on the ﬂ oor in front of a chair. The surface must
be ﬂ at.

♦

Place the function switch 1 at 0 (OFF).

Fitting the attachment for the centre console

♦

Select an attachment 0/q/w for the centre console:

–

Brush attachment w: to stimulate the reﬂ ex zones in the sole of the foot
and for massage.

–

Roller attachment q: is used to massage and promotes blood circulation.

–

Callous remover 0: for gentle removal of hard skin.

♦

Place the respective attachment 0/q/w in the insertion slot 6 of the
centre console so that it is seated ﬁ rmly. When you want to change it,
simply pull the attachment 0/q/w upwards.

NOTICE

►

You can put two attachments 0/q/w on the attachment holder 9 and
hang them on the edge of the Foot Bubble Bath. Then the attachments 0/
q/w are always to hand.

IB_73829_SFB120B2_LB4.indb Abs2:7

06.02.12 12:47