Silvercrest SKHD 1800 A1 - Manual (Page 12)

10
8. Troubleshooting
9. Disposal
9.1 Appliance
The symbol with the crossed-
out rubbish bin on wheels
means that within the European
Union, the product must be
disposed of to a sorted rubbish
collection. This applies to the
product and all accessories which are
marked with this symbol. Marked products
must not be disposed of via the regular
domestic waste but must be handed in to a
recycling centre for electrical or electronic
devices. Recycling helps to reduce the use of
raw materials and to relieve the
environment. It is therefore imperative that
you follow the disposal regulations
applicable in your country.
9.2 Packaging
If you would like to dispose of the
packaging, please observe the
corresponding environmental regulations in
your country.
Fault Cause Remedy
Appliance cannot be
switched on Faulty fuse or wall socket Select another wall socket
Faulty appliance Have repairs carried out at a specialist
workshop or dispose of the appliance.
You will find the service address in
“10. HOYER Handel GmbH Warranty”
on page 11.
Appliance switches
off automatically Safety switch has triggered Set the appliance upright (see
“7.6 Safety switch” on page 9)
Thermal cut-out has
triggered Allow the appliance to cool down (see
“7.5 Thermal cut-out” on page 9)
Clean the appliance (see “6. Cleaning”
on page 7)
Only cold air is pro-
duced Selected temperature has
been reached Appliance switches on again automati-
cally as soon as the room temperature
falls
Select a higher desired temperature
RP74339 KeramikHL LB4so2 Seite 10 Montag, 7. Mai 2012 2:19 14