Emerson Radio CKS3528 User Manual

Page 23

2 2

Resetting The Clock After A Total Memory Loss

If you do not change the built in lithium battery within a reasonable period of time

after you see the

warning indicator, the lithium battery may become exhausted

and will no longer be able to supply back up power to the SmartSet

internal

computer. If the unit is disconnected from the AC outlet after the battery is exhausted,

or if a power interruption occurs, the SmartSet

memory will be lost and the clock

will need to be reset when the power is restored. Be sure to install a fresh lithium

battery before you reset the clock, otherwise the clock will need to be reset each

time the power is interrupted.

If the lithium battery is exhausted and you experience an interruption in the AC

power supply, the clock will reset itself to its initial default setting when the power is

restored.

The initial default setting is “12:00 AM, Saturday, January 1

(1. 1), 2005”.

If you notice that the time on your SmartSet

clock radio is completely incorrect,

and the DAY OF WEEK indicator is also wrong, press the MONTH/DATE button to

see the date.

If the date display is showing “1. 1” (January

first), you probably experienced a total memory

loss.

To reset the clock after a total memory loss, proceed as follows:

1.) Follow the instructions on page 20-21 and install a new CR2430 lithium battery

in the battery compartment.

2.) Connect the radio to your AC outlet and let the clock set itself.

3.) Depress the MONTH/DATE and TIME buttons together. The display will change

from ‘Time’ to ‘Year’.

While holding the MONTH/DATE and TIME buttons, press the SET + button

to set the display to the correct year, then release the buttons.

CKS3528_110606.p65

9/11/2006, 14:07