Product specification – Encore electronic ENPWI-N User Manual

Page 2

Drivers support Windows® 2000, XP and Vista™

Simple user setup & diagnostics utilities

Type approval compliant with FCC Part 15.247 for US

Product Specification

Standards

IEEE 802.11b
IEEE 802.11g
IEEE 802.11n Draft 2.0

Radio Technology

IEEE 802.11g / IEEE 802.11n Orthogonal Frequency
Division Multiplexing (OFDM)
IEEE 802.11b: Direct Sequence Spread Spectrum
(DSSS)

Interface

32-bit CardBus Type II specification

Transmission Rate

1, 2, 5.5, 6, 11, 12, 18, 22, 24, 30, 36, 48, 54, 60, 90, 120,

180, 240, 270, 300Mbps (auto sense)

Receiver Sensitivity

300Mbps: Typical - 62dBm @ 10% PER

54Mbps: Typical - 68dBm @ 10% PER

11Mbps: Typical - 85dBm @ 8% PER

Modulation Schemes

DBPSK/DQPSK/CCK/OFDM

(BPSK/QPSK/16-QAM/64-QAM)

Media Access Protocol

CSMA/CA with ACK

Transmit Power

17dBm typically @ 802.11b

13dBm typically @ 802.11g

13dBm typically @ 802.11n

Channel USA:

Europe: 13

Japan: 14

Driver Support

Windows® 2000/XP, Vista™

Security

64/128-bits WEP Encryption

WPA-PSK, WPA2-PSK, WPA, WPA2

Wireless LAN Frequency

Range

2412 ~ 2484 MHz ISM band (channels 1 ~ 14)

Range Coverage

Indoor: Up to 100 meters (depends on environment)

Outdoor: Up to 300 meters (depends on environment)

Antenna Type

Internal two PIFA antennas and one printed antenna

Continuous Current

Consumption

350mA/480mA typ. for receive/transmit mode @ 802.11b

390mA/480mA typ. for receive/transmit mode @ 802.11g

500mA/630mA typ. for receive/transmit mode @ 802.11n

Dimensions (W x H x D) 115 x 54x 8.7mm

Diagnostics LEDs

Power & Link status

Operation Temperature 0 ~ 40°C