Silvercrest Z30412-DK - Manual (Page 181)

183 GB/MT
11. Press the SET button 3 to confirm
your settings. The decimal point digit
flashes.
12. Press the SELECT button 6 repeat-
edly until the decimal point is in the
desired position – in this example
before the “1“.
13. Press the SET button 3 to confirm
your settings. The -:-- display appears
in the LC display
1 . The
COST / kWh (cost / kilowatt-hour)
display is no longer illuminated.
14. Press the FUNCTION button 2 to
end your input.
15. Press and hold down the FUNCTION
button 2 for approx. 3 seconds to
switch to the basic mode (voltage
display).
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 183 25.05.11 12:21