Silvercrest KH 2299 - Manual (Page 8)

- 6 -
The appliance components
q
Mounting plate/Baseplate
w
Power cable
e
Wire aerial
t
–i M1–M4 - Memory buttons M1–M4
o
MEM/AMS - to save and automatically search
for and save radio stations
a
MEM.SCAN - automatic recall of saved radio
stations
s
TIMER - controls the timer programming
d
Illuminated clamp strip
f
AL2/VOL — - controls the alarm function 2
- Volume reduction
g
AL1/VOL + - controls the alarm function 1
- Volume increase
h
USER/BAND - User switching,
Radio waveband switching
j
LIGHT/DIMMER - controls the display and
clamp strip illumination
k
MODE/LOCK - recalls the settings,
Button lock
l
DOWN  - Selection button down
1(
UP  - Selection button up
2)
Battery compartment
2!
ON/AOT/OFF - Switch the radio on/off
controls the switch off timer
Setting up the appliance
First take all appliance components from the packaging and
remove all packing foil and tape.
Inserting the back-up batteries
The back-up batteries ensure that the time, date and alarm
time setting are not lost in the event of a power cut. For this
you require two 1.5 V batteries of the type AAA/Micro.
They are not supplied.
1. Open the lid of the battery compartment 2) on the under-
side of the kitchen radio.
2. Insert the batteries. Make sure the polarities are correct.
Otherwise, the memory receipt will not function and dam-
age may be caused to the appliance.
3. Close the lid of the battery compartment 2). The lid must
audibly engage.