Silvercrest KH 2299 - Manual (Page 11)

- 9 -
2. Press the buttons UP  /DOWN  1(/l to set the first
desired reminder date. Pressing and holding the buttons
changes the date at intervals of 10 days.
3. When you press the button TIMER s, the year number is
deactivated and thus you are reminded on this date every
year.
4. Should you wish to programme in further dates, press the
button MEM.SCAN a to select the desired memory posi-
tions 2-6.
5. Follow the same steps with the other dates.
6. To deactivate the memory function, programme in a date
that lies in the past.
7. Press the button MODE/LOCK k once again to save the
settings of the memory function and to switch to setting
the update function.
Setting the update function
Using this function, the appliance can automatically update
the settings for the clock based on the RDS data.
1. In automatic mode press the button MODE/LOCK k four
times. The display r shows "UP DATE".
2. Press the button DOWN  l, to deactivate the Actual-
isation function. The blinking clock symbol in the dis-
play r then disappears.
3. Press the button UP  1( to reactivate the update function.
The hour symbol appears.
4. Press the button MODE/LOCK k once again to save the
settings of the update function and to switch to setting the
12 or 24 hour mode.
Selecting 12 or 24 hour time display
1. In automatic mode press the button MODE/LOCK k
five times. In the display r appears "24 HOUR" for the 24
hour modus.
2. Press the button DOWN  l to select the 12 hour
modus. In the display r appears "12 HOUR". Press the but-
ton UP  1( to return to the 24 hour modus.
In the 12 hour mode "AM" appears between 0:00 and
11:59 ( ante meridiem = mornings) behind the time display,
from 12:00 to 23:59 "PM" ( post meridiem = afternoons) is
shown in the display r.
Press the button MODE/LOCK k to save the menu settings
and to close it down.