Setting up and connecting, Disposal of packaging, Electrical connection – Silvercrest SAD 12 A1 User Manual

Page 9

Setting up and connecting

SAD 12 A1

Disposal of packaging

The packaging protects the appliance against transport damage.
The packaging materials are selected from the point of view of
their environmental friendliness and disposal technology and are
therefore recyclable.

The recirculation of packaging into the material circuit
saves on raw material and reduces generated waste.
Dispose of packaging material that is no longer needed
according to the regionally established regulations.

Electrical connection

IMPORTANT

Before you connect the appliance to the power supply, check

►

to ensure that the required input voltage as given on the type
plate tallies with that for the intended power source. To avoid
possible damage to the appliance this data must match.
Check to ensure that the cable for the power adapter

►

is not damaged and that it does not lead over hot surfaces
and or sharp edges, otherwise it could be damaged.
Ensure that the cable for the power adapter

►

is not over-taut

or kinked.

Connect the power adapter

♦

to the appliance by inserting the

plug into the plug socket on the underside of the appliance.

Buch_64661_LB4.indb 7

17.06.2011 11:11:32 Uhr