Silvercrest SIM 13 B2 - Manual (Page 10)

- 7 -
2. Place the accessory (0, q, w, e, r, t) of
your choice on the massage head 1 and pay
attention that the round curbs of the massage
head 1 and the accessory (0, q, w, e, r,
t
) lie one on top of the other.
3. Push the accessory (0, q, w, e, r, t) onto
º38
the massage head 1 then check to make sure that
it is firmly fixed.
Usage
• Insert the power plug into a wall power socket.
Switching on
• To switch on the Infrared lamp 9 slide the
switch Infrared 4 into the position "I".
• Slide the switch Massage 5 into the position "I"
for normal vibration.
• For a stronger vibration slide the switch Massa-
ge 5 into the position "II".
ATTENTION!
After an extended heating-up of the infrared lamp 9
without bodily contact, the temperature of the lamp
can be perceived as unpleasantly high! Always
check the temperature of the infrared lamp 9 with
the tip of a finger before making contact with the
body itself. A temperature that is too high can be re-
duced by switching the infrared lamp 9 off for a
short period.
Massage
• Hold the Infrared Massage Appliance by the
grip 7 and, dependant on the application,
place the infrared lamp 9 or the massage
head 1 against the skin.
• Guide the infrared lamp 9 or the massage
head 1 in circular or straight movements slowly
over the skin.
• Massage without applying undue pressure.
• To achieve an optimal effect, try to keep the skin
taut.
• Always start the massage at the position furthest
from the heart and then slowly work towards the
heart.
Ending usage
Switching off
• After use, dependant on the application, return
the switches Infrared 4 and Massage 5
back into the position "0".
• Remove the plug from the wall power socket.
WARNING!
After use do not lay the Infrared Massage Appliance
down with the infrared lamp 9 facing downwards!
It could still be hot and there is still a grave risk of
fire!
• When laying it down always ensure there is
sufficient safety distance between the massage
appliance and inflammable objects such as
curtains, tablecloths etc..
• Remove the accessories (0, q, w, e, r, t)
from the massage head 1 and lay the massage
appliance with the flat area of the massage
head 1 facing downwards.
ATTENTION!
For approx. 15 minutes after the last usage do not
leave the appliance without supervision.
IB_102535_SIM13B2_LB4 30.07.2014 16:24 Uhr Seite 7