Emerson Liebert XDCF - Manual (Page 21)

Piping Connections and Piping Access Points
17
Figure 16 Profile view of the Liebert XD system
7. Place the protective dust cap and plug back onto both ends of the coupler on the Liebert XDCF
and the port pipe.
Figure 17 Piping mains without Liebert XDCF and Liebert XD Flex Pipe
8. Repeat Steps 5 through 7 for the return coupler (larger coupler).
9. Carefully lay the Liebert XD Flex Pipe aside.
NOTICE
Do not fold or bend Liebert XD Flex Pipe. Kinks in the tubing can cause permanent damage to
the Liebert XD Flex Pipes.
10. Carefully unbolt the Liebert XDCF from the cabinet.
11. Place the Liebert XDCF on a stable surface.
5.7 Insulation
To minimize the possibility of condensation, insulate all piping between the Liebert XDCF and the
Liebert XDP or Liebert XDC.
Service
Valve
Return
Line Supply
Line