Switching on / off / selecting the temperature, Temperature levels, Automatic switchoff – Silvercrest SWD 100 C2 User Manual
Page 34: Cleaning and care
34 GB/MT
Switching on / off /
Selecting the temperature
Switching on:
Set the control unit
1
to level 1, 2, 3, 4, 5 or 6
to switch on the heated blanket.
Note: The function display
2
will light up af-
ter switching the heated blanket on.
Switching off:
Set the control unit
1
to level 0 to switch the
heated blanket off.
Note: The function display
2
will go off.
Selecting the temperature:
Set the control unit to the highest temperature
setting (setting 6). This will cause the heating
pad to warm up quickly.
When opera-
ting the heated blanket for several
hours, we recommend setting the
control unit
1
to the lowest setting to
prevent the body from overheating
and to prevent potential subsequent
skin burns or a heat stroke.
Temperature levels
Set the control unit
1
to the desired tempera-
ture (see Fig. A).
Level 0:
off
Level 1:
minimum heat
Level 2–5: custom settings
Level 6:
maximum heat
Automatic switchoff
Note: The heated blanket switches itself off auto-
matically after approx. 180 minutes. The function
display
2
on the control unit
1
will then start
flashing.
To switch the heated blanket back on, first se-
lect level 0 and after approx. 5 sec. select the
desired temperature level.
If the heated blanket is no longer used
after the timer expires:
– switch off the heated blanket (level 0),
– unplug from the socket,
– disconnect the plug-in connector
3
, thus the
control unit
1
from the heated blanket.
Cleaning and Care
DANGER TO
LIFE BY ELECTRIC SHOCK! Before
cleaning the heated blanket, always
unplug the mains plug from the socket and dis-
connect the plug-in connector
3
, thus the con-
trol unit
1
from the heated blanket (see Fig. B).
Otherwise there is a risk of electric shock.
Use a dry, lint-free cloth for control unit
1
cleaning and care.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY!
Never immerse the control unit
1
in water or other liquids. It may otherwise be
damaged.
If the heated blanket is slightly soiled, use a
dampened cloth and a little liquid mild deter-
gent, if necessary.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Never
use chemical cleaning agents or
scouring agents to clean the heated blanket
and control unit
1
. The heated blanket and
control unit
1
may otherwise be damaged.
The heated blanket is machine
washable. Set the washing machine
at an extra washing cycle for deli-
cate items at 30 °C.
Use a mild detergent at the dose recommended
by the manufacturer.
Please note, frequent washing will cause wear
on the heated blanket. It should therefore be
washed no more than a maximum of 5 times in
a washing machine during its lifetime.
Cleaning and Care / Storage / Disposal / Warranty / Service centre
Start-up / Cleaning and Care