Silvercrest SKRP 1000 A1 - Manual (Page 11)

- 9 -
Note:
By pressing and holding the button
ON/AOT/OFF 2! you switch to the func-
tion switch-off time (see S. 10 chapter
AOT Switch-off timer).
Manual station selection
1. Using the button USER/BAND h, select
the required radio frequency: MW (AM)
or VHF (FM).
2. Briefly press the button UP  1( repeat-
edly to search for stations with a higher
frequency than the one shown in the dis-
play r.
3. Briefly press the button DOWN  l
repeatedly to search for stations with a
lower frequency than the one shown in
the display r.
4. Should the currently selected radio station
transmit RDS data, the -indicator
lights-up in the display r. Then the dis-
play r shows the name of the radio sta-
tion, and the time is updated (if activated
in the settings, see section "Setting Update
function").
Automatic station search
You can have the kitchen radio search for
stations. The kitchen radio searches the fre-
quency range until it finds a station.
1. Press and hold the button UP
 1( for two
seconds: the kitchen radio searches for
the station with the next highest frequency.
2. Press and hold the button DOWN  l
for two seconds: the kitchen radio search-
es for the station with the next lowest fre-
quency.
Repeat these steps until you have found a
radio station to your liking.
Save and recall a radio station manually
As the appliance can be used by numerous
people, it is fitted with user switching, A/B.
Both users can save different radio stations.
To switch between users, press and hold the
button USER/BAND h for three seconds.
The selected user "A" or "B" is indicated in
the display.
Each user can save 36 radio stations in the
appliance. 32 x VHF stations and 4 x MW
stations. For saving UKW stations, User "A"
has available:
Preset button M1 t for the save positions
A1 – A8,
Preset button M2 y for the save positions
B1 – B8,
Preset button M3 u for the save positions C1
– C8, and
Preset button M4 i for the save positions
D1 – D8.
Available for User "B" are:
Preset button M1 t for the save positions
11 – 18,
Preset button M2 y for the save positions
21 – 28,
Preset button M3 u for the save positions 31
– 38, and
Preset button M4 i for the save positions
41 – 48.
Press the corresponding preset button once to
address the save position "1", press twice for
"2", etc.
With MW radio stations, each preset button
is for one of the 4 save positions.
1. Setting the user, the desired radio wave-
length and the desired radio station.
2. Press the button MEM/AMS o. In the
display r the save position indicator and
"MEM" blink.
3. Press one of preset buttons M1–M4
t
–i, if necessary repeatedly, to save
the radio station to the desired save posi-
tion. In the display r, the indicator for the
save position selected by you and "MEM"
blink.
4. Press the button MEM/AMS o once
again. "MEM" and the memory space will
be briefly displayed, the station is now
saved.
BDA_SKRP 1000 A1_3_A5_uk.indd 9 10.12.2010 16:57:12