Silvercrest SKRP 1000 A1 - Manual (Page 10)

- 8 -
Alarm function Symbol in the display r
Acoustic signal
Radio
Switched off no symbol
1. In automatic mode press the button AL1/
VOL. + g (or AL2/VOL. – f). In the
display r the last set alarm time and the
symbol for the type of alarm blink for 10
seconds.
2. Press the buttons UP  /DOWN  1(/l
to set the desired alarm time.
3. Press the button AL1/VOL. + g (or AL2/
VOL. – f) repeatedly until the desired
alarm function (see the table above) is
indicated in the display r.
4. Repeatedly press the button TIMER s to
set the weekdays on which you require the
alarm function: You can select between
"workdays" (Mo, Tu, We, Th, Fr), "week-
ends" (Su, Sa) and "every day" (Su, Mo,
Tu, We, Th, Fr, Sa). Thereby, orientate
yourself on the weekday indicator in the
display r:
Mo = Monday
Tu = Tuesday
We = Wednesday
Th = Thursday
Fr = Friday
Sa = Saturday
Su = Sunday.
5. If you hold the button TIMER s pressed
down for 2 seconds, you can also,
through repeated brief pressing of the
TIMER s button, select a specific week-
day (e.g. only "We"). The selected setting
is indicated in the display r.
6. To return to the selection of workdays,
weekends or whole weeks, once again
hold the button TIMER s pressed down
for 2 seconds.
7. After 10 seconds the blinking in the
display stops and your input is saved.
The appliance then returns to automatic
modus.
When the alarm signal sounds...
• and the alarm function "Radio" has been
selected, the radio plays for one hour
at a pre-defined alarm volume. To finish
press any button , even if the button lock is
switched on.
• and the alarm function "Signaltones" has
been selected, the signal tone sounds for
10 minutes, with an increasing volume. To
finish press any button , even if the button
lock is switched on.
The Reminder function
The appliance can remind you of a date that
you have set with the reminder function. In
this case, the acoustic reminder alarm will
sound for 10 minutes at the set hour. In addi-
tion, the SDA indicator flashes in the display r.
Press any button to stop the reminder alarm,
even if the button lock is switched on.
Radio operation
For radio reception, completely unwind the
wire aerial e and, with the radio switched
on, determine the most favourable position-
ing for it. The appliance has a built-in ferrite
aerial for the reception of MW transmitters.
Should the MW reception be insufficient,
please turn the appliance towards a more
favourable direction.
Switching the radio on and off
1. To switch the radio function on, press the
button ON/AOT/OFF 2!. In the display
r
the currently selected frequency is
shown.
2. Press the button ON/AOT/OFF 2! once
again to switch the radio off and return
the appliance to the automatic modus.
BDA_SKRP 1000 A1_3_A5_uk.indd 8 10.12.2010 16:57:12