Euro-Pro EP908H - Manual (Page 6)

FEATURES OF STEAM CLEANER USAGE SUGGESTIONS FOR STEAM CLEANER
4. Heavy-duty crush-resistant
4-ft hose.
Wood, Vinyl and Marble Floors
Use the floor brush with a terry cloth
attached. Move the brush across the floor
as if you are mopping. When the towel is
soiled, allow to cool, then turn the towel
over or replace it with a clean towel. If
you are working on a very dirty area, you
can move the brush over the area slowly,
several times. If it is a wood floor, move
fast to avoid heat or moisture buildup in
the wood. By cleaning with the towel over
the brush, you will not affect the shine on
the floor.
To Strip Wax: Use floor brush for open
areas; detail brush for corners or tight
areas - no towel, slow strokes. Work a
small area at a time - remove the
emulsified wax from the floor. When all of
the wax has been stripped, immediately
clean the floor and brushes with water
before residue has a chance to harden on
them. Go back over the stripped area with
the floor brush with a towel to remove any
remaining residue before waxing.
To Clean Waxed Floors: Wrap clean
towel around the floor brush, brush
quickly. This will cause the dirt to be
removed but not the wax.
Vinyl Floors: Do not allow heat to buildup
in any kind of vinyl, since it can soften it
enough to affect its texture. Work fast on
vinyl.
Tile Floors: Use the concentrator with the
detail brush attached to an extension.
Have the floor brush with cloth attached
ready as well. Clean the grout between
the tiles with the detail brush. Remove the
detail brush and attach the floor brush,
move the brush across the floor to clean
the tile and remove excess moisture and
residue. For areas of tile that are very
dirty, remove the towel and agitate with
the brush. Do not let the area dry before
you wipe with a towel.
Spot Cleaning (Carpets)
Use the concentrator with or without the
detail brush. Move slowly over the soiled
area, allowing the steam to penetrate.
Agitate with detail brush or clean towel.
Dab the spot with the towel (do not rub).
Repeat as necessary to remove stain.
Vacuum only after the carpet has
completely dried.
Always test color fastness of carpet in an
inconspicuous area before cleaning.
If your steam cleaner fails to remove
stubborn stains a commercially available
carpet shampoo may be required.
Do NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe
for use.
1. No more detergents or
chemicals. Just add water.
5. Versatile, quick-change
accessories
2. Lightweight & Portable
Upholstery
Use the floor brush attached directly to
the hand grip with a clean white terry
cloth towel. Use fast, light strokes,
avoid getting the fabric wet. Be patient
with stubborn spots; work on a spot
gently for no more than a minute at a
time, then wait five minutes for the area
to dry and repeat. Use circular
movements or back-and-forth and side-
to-side movements to get all sides of
surface fibers then blot with a towel.
Finish with a brushing in one direction
that will give the fabric a uniform
appearance.
6. Multipurpose Steam Cleaner:
Bathrooms, kitchens, living
areas, pet areas and
appliances.
Automotive, patio and
windows.
3. Stainless Steel Boiler:
Non-corroding, stainless
steel boiler. Welded
construction.
CAUTION: Always determine the
color-fastness of any fabric-especially
with reds or blues - by taking a clean,
moist, warm towel and gently rubbing
a small area as far down on the back
or other out of the way place on the
furniture as possible. If color comes
off on the towel, you may need to
have the piece dry cleaned.
9 4