Introduction / safety, Safety / preparation, Energy-saving ceiling lamp – Livarno Energy-Saving Ceiling Lamp User Manual
Page 18: Introduction, Proper use, Included items, Description of parts and features, Technical details, Safety safety advice

18 GB
Introduction / Safety
Energy-Saving Ceiling Lamp
Introduction
We congratulate you on the purchase
of your new device. You have chosen a
high quality product. Please read care-
fully and completely through these operating in-
structions. Fold out the page with the illustrations.
These instructions form part of the product and
contain important information about bringing the
product into use and its handling. Always observe
all the safety advice. Check that the correct mains
voltage is available and that all the parts have
been properly assembled before bringing into use.
Should you have any questions or be uncertain as
to how to operate the device, please get in touch
with your dealer or service point. Please keep these
instructions in a safe place and hand them on to a
third party if necessary.
Proper use
This light is suitable only for interior use, in dry and
enclosed spaces. The light can be fitted to all normally
inflammable surfaces. This lamp is intended for use
only in a domestic environment.
Included items
Check that all the items and accessories are present
and that the lamp is in perfect condition immediately
after unpacking.
1 Ceiling light, model 3116-062L (6-light)
6 Energy-saving bulbs E14, 9 W
6 Lamp glasses
1 Remote control handset
1 Battery, 12 V , 23A
2 Dowels
2 Screws
1 Tool
1 Operating instructions
Description of parts
and features
1
Mounting bracket with elongated holes
2
Screws
3
Mains connection cable (external)
4
Terminal block
5
Receiver
6
Connection enclosure
7
Spot
8
Remote control handset
9
Fitting (socket)
10
Lamp glass
11
Threaded ring
12
Tool
13
Bulb
Technical details
Ceiling light:
Operating voltage:
230–240 V ∼, 50 Hz
Energy-saving light bulb: 220–240 V ∼,
9 W, E14
Maximum nominal output: 6 x 9 W
Protection class:
I
Remote control receiver:
Rated voltage:
220–240 V ∼, 50 Hz
Max. load capacity:
1000 W
Frequency:
433.92 MHz
Remote control transmitter:
Operating voltage:
12 V , 23 A
Frequency:
433.92 MHz
Safety
Safety advice
The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by
the non-observance of these operating instructions!
No liability is accepted for consequent damage!
No liability is accepted for damage to property or
Safety / Preparation