Livarno LLS 06 A1 - Manual (Page 34)

LED spotlight LLS 06 A1
32 - English
Any safety covers which come off must be replaced.
The LED spotlight has a ground wire connection. The ground wire (yellow/green) must
be connected to the terminal shown:
This symbol indicates important instructions for the safe operation of the device and the
protection of the user.
Electrical devices are not suitable for children. Never allow children use electrical devices
unsupervised. Children may not understand that they can be dangerous. Keep the packaging
materials out of the reach of children. Risk of suffocation!
If you notice any smoke, unusual noises or strange smells, switch the device off immediately. If this
occurs the device should no longer be used and should be inspected by authorised service
personnel. Never inhale smoke from a possible device fire. If you do inadvertently inhale smoke,
seek medical attention. Smoke inhalation can be damaging to your health.
The casing of the LED spotlight must not be damaged. If the casing is damaged, there is a risk of
electric shock.
Never open the casing of the LED spotlight as there are no components inside which require
maintenance. If the casing is opened, there is a risk of electric shock.
Do not hang anything off the LED spotlight. The casing is not designed to support weights. This could
damage the LED spotlight.
Never use optical instruments such as a magnifying glass to look directly into the beam. This could
damage your eyes. If you suspect you have damaged your eyes, seek medical attention.
Before you start
Remove the LED spotlight and fitting materials from the packaging.
Test the LED spotlight for damage. If the LED emitter with movement sensor is damaged, do not use it.