Livarno Z29964A-BS User Manual

Page 2

The LED becomes hot during operation. Allow the lamp and bulb to cool before you
touch them.

The LED cannot be replaced.

Avoid risk of loss of life from electric shock!

RISk OF ELECTRIC SHOCk! Always check the device for damage

before plugging it into a mains outlet socket. A damaged device presents a risk of loss
of life from electric shock.

Before use, ensure that the mains voltage available is the same as the required operating
voltage for the device (230–240 V∼).

Do not use the device if you find any damage.

Dispose of the lamp if you discover any damage to the mains lead, mains adapter or lamp.

The supply cord of the lamp cannot be replaced. If the cord is damaged, the device
should be scrapped.

Never open any of the electrical equipment or insert any objects into it. Such interven-
tions represent the danger of death from electric shock.

It is essential that the device does not come into contact with water or other liquids.

Never use the device in the immediate vicinity of a bathtub, shower or swimming pool.

Never touch the mains plug

with damp or wet hands.

Assembly

Screw the screw

out of the lamp head and place it carefully to one side.

Insert the lamp head

into the rod

. Carefully pull on the cable while doing so.

Align the thread and the notch-out for the screw with one another. Using the hexagonal
key

, screw the screw

sufficiently far into the lamp head

so that the latter is

flush with the housing.

Unscrew the screws

from the rod

and place it carefully to one side.

Attach the rod

Insert the screws

through the rod

and screw it firmly into the rod

by using the

hexagonal key

Your lamp is now ready for operation.

Use

Set up the lamp on a horizontal, even surface.

Insert the plug adapter

on the mains lead into the socket.

Press the ON / OFF switch

to switch the desk lamp on or off.

Turn the lamp head

in the desired direction.

maintenance and Cleaning

Note: The device requires no maintenance.
The LEDs cannot be replaced.

To do this pull the adapter

out of the mains socket.

CAUTION! DANGER OF ELECTRIC SHOCk! For electrical safety reasons do not
clean the lamp with water or other liquids and never immerse it in water. Always use a
dry fluff-free cloth for cleaning the device.

Do not use any solvents, petrol or similar. This would cause damage to the light.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose
of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your
worn-out product.

To help protect the environment, please dispose of the product properly when it has
reached the end of its useful life and not in the household waste. Information on
collection points and their opening hours can be obtained from your local authority.

EMC

IAN 73526

Milomex Ltd.
c / o Milomex Services
Hilltop Cottage
Barton Road
Pulloxhill
Bedfordshire
MK45 5HP
UK

Model No.: Z29964A-BS
Version: 04 / 2012

Last Information Update: 02 / 2012
Ident.-No.: Z29964A-BS022012-6