EXP Computer ThinCom PCMCIA Ethernet Modem Adapter - Manual (Page 6)

INTRODUCTION
- 2 -
The system should have at least one Type II or Type III (5.0 mm or 10.0 mm thickness) slot.
2. DOS version 5.0 or higher
Or
Windows 95
3. Socket Service and Card Service compliant with PCMCIA 2.10 to operate the
PC Card (PCMCIA ) slot.
Normally, the device driver is pre-installed on the computer from the factory.
4. Network operating system software compatible with NDIS or ODI drivers.
5. A RJ-45 (10 Base-T) jack connect to a network server or a computer.
6. A working analog telephone line