Livarno LHS 55 A1 - Manual (Page 16)

Rechargeable Battery Flashlight LHS 55 A1
14 - English
Appendix
Cleaning
To clean the flashlight use a dry cloth. Never use
any solvents or cleaners that may damage the
plastic housing. Make sure that no liquid gets into
the housing. If the product is very dirty, use a
slightly moistened cloth otherwise the device may
suffer damage.
Servicing
The LEDs and the battery cannot be replaced.
Replacing the Bulb
The built-in H3 halogen bulb must be replaced
by authorized service personnel only.
 After the lamp has cooled down, unscrew the
reflector ring [3] counter-clockwise.
 Carefully remove the reflector [2] forwards.
 Slide the insulation hose apart and disconnect
the bulb from the cable.
 Press the holding wire of the bulb together,
unhook it from the holder and remove it.
 Next remove the bulb.
 Replace the H3 6 V/55 W bulb by a new bulb of
the same type.