Livarno Z30613A/Z30613B - Manual (Page 3)

5 GB
Installation / Cleaning and Care / Disposal
Fitting the protection
against tilting
Note: You will need a drill for this stage of the
work.
DANGER TO LIFE! Make sure
that you do not hit electrical cables, gas or
water pipes when you drill into the wall. You
may have to check with a cable locator before
drilling into a wall.
CAUTION! RISK OF INJURY, DANGER
TO LIFE AND RISK OF DAMAGE TO
PROPERTY! Carefully read the operating and
safety instructions of your drill.
Before assembly, check whether the wall is
suitable for fastening the product to it. You may
have to ask a professional what one should
keep in mind when attaching it and whether
the L-screw
21 and the plastic dowel 26 are
suitable for the wall in question. Use suitable
fastening parts for uneven walls.
Using a drill, drill a hole with a diameter of
approx. 6 mm into the wall.
Insert the plastic dowel 26 into the hole and
screw the L-screw 21 into the dowel (make sure
the hook is pointing upwards when you have
finished).
Hook the back of the chest of drawers onto the
L-screw (see Fig. L).
Cleaning and Care
Do not under any circumstances use corrosive
or abrasive cleaning agents. These may dam-
age the product.
Clean the product with a dry, non-fluffing cloth.
To remove more stubborn dirt, use a damp
cloth and, if necessary, a mild cleaning agent.
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
Product description:
Nursery chest
Model No.:
Z30613A / Z30613B
Version: 11 / 2010
56152_liv_Kinder-Kommode_Content_LB4.indd 5 04.05.11 08:36