Livarno Z30613A/Z30613B - Manual

3 GB
Introduction
Nursery chest
Introduction
Before assembling and using the product
for the first time, take time to familiarise
yourself with the product first. Read the
following assembly instructions and safety instruc-
tions carefully. Only use the product as described
and for the designated areas of application. Please
keep these instructions in a safe place. If you hand
this product on to a third party, you must also pass
on all documents relating to the product.
Intended use
This product is designed for storage in children‘s
rooms. It is designed for use in private, dry, indoor
areas. Any use other than previously mentioned or
any product modification is prohibited and can lead
to injuries and / or product damage. The manufac-
turer is not liable for any damages caused by any
use other than for the intended purpose. The product
is not intended for commercial use.
Description of parts
and features
1 Cover panel
2 Right side panel
3 Left side panel
4 Rear panel
5 Intermediate shelf
6 Door
7 Floor element
8 Front panel (drawer)
9 Side panel (left)
10 Base panel (drawer)
11 Rear panel (drawer)
12 Side panel (right)
13 Furniture knob made of wood
14 Screw-in dowel
15 Eccentric connector
16 Cross-head screw (approx. ø 6 x 42 mm)
17 Cross dowel
18 Cross-head screw (approx. ø 3 x 10 mm)
19 Cross-head screw (approx. ø 3 x 12 mm)
20 Door hinge
21 L-screw for wall mounting (protection against
tilting)
22 Stabiliser for rear panel
23 Drawer slide
24 Cross-head screw (approx. ø 2.5 x 25 mm)
25 Cross-head screw (approx. ø 4 x 25 mm)
26 Plastic dowel
27 Wooden dowel
28 Furniture gliders (self-adhesive)
29 Plastic washer
Scope of delivery
Check the package contents for completeness and
condition of the product immediately after opening
and ensure all parts are present. Do not under any
circumstances assemble the product if the delivery
is incomplete.
1 Cover panel
1 Right side panel
1 Left side panel
1 Rear panel
1 Intermediate shelf
1 Door
1 Floor element
1 Front panel (drawer)
1 Side panel (left)
1 Base panel (drawer)
1 Rear panel (drawer)
1 Side panel (right)
2 Furniture knobs made of wood
10 Screw-in dowels
10 Eccentric connectors
4 Cross-head screws (approx. ø 6 x 42 mm)
4 Cross dowels
4 Cross-head screws (approx. ø 3 x 10 mm)
20 Cross-head screws (approx. ø 3 x 12 mm)
2 Door hinges
1 L-screw for wall fastening (protection against
tilting)
4 Stabilisers for rear panel
56152_liv_Kinder-Kommode_Content_LB4.indd 3 04.05.11 08:36