Livarno 52695 - Manual (Page 18)

English
Mounting, switching on, malfunctions
Observe all of the instructions and warnings. Improper use or incorrect operation can lead to serious physical injury
(e.g. from electric shock or burning) and substantial material damage (e.g. from fire).
Storage and transport
Store and transport the lamp only in its original packaging. Protect packaged light from mechanical impact, moisture, frost and dust.
Comes with:
Lamp, glass shade, Bulb(s) included!
Unpacking
Take all the parts of the lamp out of the box and remove the packaging material. Put all the parts of the lamp on a soft surface in
front of you, such as a carpet. Check the parts for any possible visible damage.
Do not make any alterations to this article. The connecting cable may not be replaced. See a qualified electrician or
service centre for repairs. Improper repairs can lead to considerable danger for the user. Never use a lamp that
shows signs of damage.
If the connecting cable is damaged the lamp must be discarded.
Assembly
Before assembling the lamp, make sure the power plug is not connected to the mains power supply. Disconnect the power supply
from the domestic electrical installation (power socket).
1. Pull the glass over the holder and attach it using the ring nut supplied (see illus. p.2,1-2).
2. Turn the bulb clockwise into the holder (see illus. p.2,3).
3. Plug the lamp into the mains supply! (Socket)
Switching on
This lamp provides a touch-sensitive switching function. Touch-switch description: touch on/off.
Disposal of packaging
Dispose of the packaging material, sorting it according to type.
Keep packaging and wrapping away from children. Danger of suffocation!
Damage and malfunctions
In the case of malfunction or damage to the lamp, disconnect it permanently from the domestic electrical installation. Do not use it
anymore. Repairs should be carried out only by a qualified electrician or at the service centre. Never attempt to repair the lamp
yourself.
01/2010; Lidl - Block 5 new; BK38040; 52695 17/24