Safety advice for installation – Livarno Z30378 User Manual
Page 45

47
GB/MT
Use the lighting product with
only the components described
in these operating instructions.
Disconnect the lighting product
from the mains if you intend not
to use it for an extended period
(e.g. holiday).
Do not connect the LED strip
light to another strip light.
Safety advice
for installation
The product can be mounted with
the supplied fastenings on to all
surfaces officially classified as
being of “normal flammability”.
CAUTION! RISK OF
ELECTRIC SHOCK! Ensure
that you do not strike any elec-
trical cables, gas or water
pipes in the vicinity of where
you are drilling. If necessary,
check the area using a suitable
detector before you drill.
Before installation, check
whether the substrate is suitable
for the fastenings and can sup-
port the weight of the product.
If you are unsure about any
aspects of this step, please
seek the advice of an electrical
equipment specialist.
Do not use any sharp and / or
pointed objects, such as wire,
nails or clamps, to fasten the
product in place.
67026_VDE_livx_Lichtleiste_9er_content_LB5.indd 47
17.06.11 10:46