Livarno 102631-14-01 - Manual (Page 9)

9 GB
Switching off
When switching the lamp 1 off using the
OFF button 5 on the remote control 2 ,
when switching the light back on using the
ON button
6 the last colour or the last
colour change selected will be used.
However, when disconnecting the power
supply to the light by switching the light off,
when switching the light
1 back on the
light will always light up white with medium
light intensity.
Changing the battery
Change the battery 16 when the range of
the remote control 2 noticeably decreases
or the light 1 no longer responds to the
remote control being operated.
To do so, proceed as shown in Figure B.
Only use a battery type CR2025 and note
the correct polarity when inserting the
battery. This is shown on the back of the
remote control.
Cleaning and Care
Remove the lamp 1 from the light before
cleaning it. When doing so, please follow the
instructions for use of the light being used.
Clean the lamp and the remote control 2
with a dry, lint-free cloth.
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local authorities for information on
how to dispose of the product at the end of the
product‘s life.
To help protect the environment, please
dispose of the product properly, and
not in household waste, when it has
reached the end of its useful life. Please
contact your local authority for infor-
mation on collection points and their
opening hours.