Livarno 100654-14-01, 100654-14-02 User Manual
Page 5

5
GB/IE
instruction concerning use of the
appliance in a safe way and un-
derstand the hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
0.5 m
FIRE HAZARD! Fit the
light so that it is at least
0.5 m away from the material
illuminated. Fire can result from
the development of too much
heat.
This lamp is only in-
tended for use indoors.
Danger to life by
electric shock
ATTENTION! Before installation,
remove the fuse for this circuit or
switch off at the circuit breaker
(0 setting) in the fuse box.
Make sure before installing the
light that the mains voltage at
the place of installation complies
with the operating voltage of the
light (230 V~). Do not install the
light if this is not the case.
Never open or insert anything
into electrical fittings or equipment.
Doing this sort of thing can lead
to a serious danger to life from
electric shock.
Never let the lamp come into
contact with water or other liquid.
Avoiding fire hazards
and risk of injury
CAUTION! RISK OF IN-
JURY! Check the lamps and light
immediately on unpacking for signs
of damage. Do not install the light
if you discover any damage.
CAUTION! RISK OF
BURNS! Make sure that the
light is switched off and has
cooled down for at least 10 min.
before you touch it. Lamps can
become very hot.
The light cannot install in bath-
room or toilet.
Only to be installed outside arms
reach.
Correct procedure
We have included assembly ma-
terial for ceiling mounting suita-
ble for the usual firm masonry.
Before installation, check whether
the included mounting material is
suitable for the wall or ceiling on
which you are aiming to mount
the lamp.