Livarno 102618-14-01-BS - Manual (Page 11)

11 GB/IE/CY
Preparing the product for use
Switching the lamp on / off
Press the ON button of the remote control 6 , to switch
the light on.
Press the OFF button of the remote control to switch the
light off.
Note: The OFF switch of the remote control is only suita-
ble for short term switching off of the light.
Pull the plug in mains adapter 2 from the mains socket
to switch off the light permanently.
Controlling the light effects with the
remote control
Note: The infrared sensor is on the opposite side to the
battery compartment. The receiver is on the LED driver
1 .
The range is approx. 6–8 m
Note: For all light functions except STROBE and FADE the
intensity can be adjusted.
Ensure that there are no obstacles between the sender
and the receiver.
102618_Glaskantenbeleuchtung_content_GB_IE_CY.indd 11 18.08.14 15:09