Livarno HALOGEN CEILING LIGHT - Manual (Page 33)

33 GB
... / Maintenance ... / Guarantee and Service / Disposal / Declaration of conformity
Insert the new bulb 14 into the socket carefully
and tighten it with a ¼ turn. Check for correct
fitting.
Then attach the chrome-plastic decorative ring 15
carefully to the bulb 14 of the movable spot-
light 11 .
Maintenance and Cleaning
CAUTION! DANGER OF ELECTRIC SHOCK!
To clean the luminaire, first disconnect it from the
mains circuit. To do this, remove the fuse or switch
off the circuit breaker in the fuse box (0 position).
CAUTION! DANGER OF ELECTRIC SHOCK!
For electrical safety reasons, never clean the lumi-
naire with water or other fluids nor immerse it in
water.
CAUTION! DANGER OF BURN INJURIES!
Allow the luminaire to cool completely.
Do not use solvents, benzene or similar sub-
stances. They could damage the luminaire.
Only use a dry, lint-free cloth for cleaning.
Guarantee and Service
Warranty Declaration
This product has a 3 year guarantee from the date
of purchase extended only to the original buyer,
not transferable. Please keep your receipt as proof
of purchase. The guarantee applies to material or
manufacturing defects only. It does not cover wear
items or damage caused by improper use. Any
modifications will void the guarantee. This warranty
does not limit your legal rights. Contact the service
centre by telephone if there is a guarantee case. This
is the only way to return your device free of charge.
Service address
Briloner Leuchten GmbH
Im Kissen 2, 59929 Brilon, Germany
Phone:
+49 (0) 29 61 / 97 12–0
Fax: +49 (0) 29 61 / 97 12–199
Email: [email protected]
www.briloner.de
IAN 94074
When inquiring about your product, please have
your receipt and product number (e.g. IAN 12345)
ready as your proof of purchase.
Disposal
The package and packaging materials consist
entirely of environmentally friendly materials. They
can be disposed of at your local recycling facility.
The symbol of the wheelie bin with the
line through it means that in the Euro-
pean Union the product must be dis-
posed of in a separate refuse collection. This
applies to the product and to all components bear-
ing this symbol. Products marked in this manner must
not be disposed of along with normal household
waste, but rather must be taken to a recycling collec-
tion point for electrical and electronic appliances.
Recycling helps to reduce the consumption of raw
materials and protects the environment.
Declaration of conformity
This product conforms to the requirements of the
applicable European and national directives
(Electromagnetic Compatibility 2004 / 108 / EC,
Low Voltage Directive 2006 / 95 / EC, Ecodesign
directive 2009 / 125 / EC, and RoHS directive
2011 / 65 / EU). Conformity has been demon-
strated. The relevant declarations and documents
are held by the manufacturer.