Livarno Z31330-BS - Manual (Page 14)

14 GB/IE/CY
Using the LED torch as light
for orientation (see Fig. B)
You can use the LED torch as a light for orienta-
tion in case of a blackout.
Plug the LED torch 2 onto the charger 3 .
Plug the charger into the mains socket. If the
power fails, the side light (6 LEDs)
7 lights
up and serves as a light for orientation. As
soon as there is power on the socket again,
the side light switches off.
Note: When the power ceases to be restored,
the side light continues to light, until the
rechargeable battery is empty – a fully
charged battery will last up to approx
2 hours.
Cleaning and Care
Before cleaning, remove the LED torch 2
from the charger 3 .
94381_liv_BS_LED_Taschenlampe_content_GB_CY.indd 14 24.09.13 09:59