Introduction, Proper use, Included items – Livarno 1241/022L User Manual
Page 29: Description of parts and features, Technical data
30 GB
Introduction
Energy-Saving Father &
Child Floor Lamp
Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. Please read carefully
and completely through these operating instructions.
Fold out the page with the illustrations. These instruc-
tions form part of the product and contain important
information about bringing the product into use and
its handling. Always observe all the safety advice.
Check that the correct mains voltage is available and
that all the parts have been properly assembled
before bringing into use. Should you have any
questions or be uncertain as to how to operate the
device, please get in touch with your dealer or ser-
vice point. Please keep these instructions in a safe
place and hand them on to a third party if necessary.
Proper use
This light is suitable only for interior use, in dry and
enclosed spaces. This lamp is intended for use only
in a domestic environment.
Included items
Check that all the items and accessories are pre-
sent and that the lamp is in perfect condition
immediately after unpacking.
1 Floor lamp, Model 1241 / 022L or 1242 / 022L
2 Lamp glasses
1 Energy-saving bulb, 9 W, E 14
1 Energy-saving bulb, 22 W, E 27
2 Threaded rings
1 Tool
1 Support tube (reading lamp)
1 Support tube (uplight)
2 Threaded rods (support tube mount)
1 Support tube mount
2 Serrated lock washers
2 Nuts
1 Open spanner
1 Operating instructions
Description of parts
and features
1241 / 022L + 1242 / 022L
1
Bulb (uplight)
2
Threaded ring (uplight)
3
Lamp glass (uplight)
4
Fitting (socket) (uplight)
5
Flexible arm
6
Fitting (socket) (reading lamp)
7
Lamp glass (reading lamp)
8a
Threaded ring with silicon ring (reading lamp)
8b
Threaded ring (reading lamp)
9
Tool
10
Support tube (reading lamp)
11
Bulb (reading lamp)
12
Mains lead with mains plug
13
Base
14
Serrated lock washers
15
Nuts
16
Support tube mount
17
Threaded rods (support tube mount)
18
Support tube (uplight)
19
ON / OFF switch (reading lamp)
20
ON / OFF switch (uplight)
21
Upper support tube
Technical data
Model No.:
1241 / 022L or 1242 / 022L
Operating voltage: 230–240 V ∼, 50 Hz
Bulbs:
Energy-saving bulbs:
230–240 V ∼, E14, 9 W;
E27, 22 W (included)
or
230–240 V ∼, E14, 25 W;
E27, 60 W (not included)
Rated max. power: 1 x 25 W (reading lamp)
1 x 60 W (uplight)
Protection class: