Electrolux TRILOBITE 8228226-02 - Manual (Page 7)

On/Off
Press the On/Off button for about one second to start and
stop Trilobite.
Stop
The Stop button has two functions. Use it to cancel a command
or to stop Trilobite during vacuuming.
Yes
Press the Yes button to confirm a setting shown on the display.
Next
Use the Next button to select items on the menu. Also use the
Next button as a “No” button when you do not want to select a
setting presented in the display.
Symbols
Information is shown in the display using status messages and
also by symbols.
(The battery capacity symbol is shown on page 24.)
27 26
Buttons and Display Vacuuming Programmes
Normal
vacuuming
Quick
vacuuming
Spot
vacuuming
Timer
Battery Charger found Dust
collector full
Clocksymbol
Normal. Timer: Auto
Select programme?
Quick. Timer: 10min
Select programme?
Spot
Select programme?
Stop
Next
On/Off
Yes
Dust collector full
Charger Found indicator
Battery indicator
Current
vacuum
programme
Remaining time
Clocksymbol
Message display
Normal vacuuming
When you start Trilobite it is ready to
start vacuuming using the Normal pro-
gramme and automatic time calculation.
1. (When Trilobite is switched off and on the
floor or placed in the charger), press to
start.
2. Press to start vacuuming.
3. If you want to select another programme,
press .
4. If you would like to change the vacuuming
programme, press (continue to “Quick
vacuuming” or “Spot vacuuming”).
5. If instead you would like to change the
time setting (this may be necessary when
vacuuming floor surfaces of 40 m
2 or
more), press again and confirm by
pressing .
6. Use to display “On” and then confirm
by pressing .
7. Set the desired time by pressing and
then confirm with .
8. Press to commence vacuuming.
NOTE! Never start Normal vacuuming at
distances under 0.5 m from a magnetic strip.
Vacuuming can always be interrupted by
pressing
. After this, pressing
recommences vacuuming, while pressing
will call up the menu.
Quick vacuuming
The Quick programme is identical with
Normal vacuuming except that wall
mapping is not included.Vacuuming
takes shorter time with the duration
preset to 10 minutes, however, the
vacuum result may be slightly inferior.
1. After you have switched on Trilobite, press
to change the programme and confirm
by pressing .
2. Use until “Quick” is displayed and
confirm by pressing .
3. If you don’t want to change the time
setting, put Trilobite on the floor and start
vacuuming by pressing
.
4. If instead you would like to change the
time setting, press until “On” is
displayed and confirm by pressing .
5. Set the desired time by pressing and
then confirm with .
6. Put Trilobite on the floor and start
vacuuming by pressing .
NOTE! Vacuuming can always be interrup-
ted by pressing
. After this, pressing
recommences vacuuming, while
pressing will call up the menu.
Spot vacuuming
Use Spot vacuuming to quickly vacuum
a limited area, e.g. if you have spilled
something.The area to be vacuumed is
approx. 1 m
2 with Trilobite placed in the
centre of the area.The area is vacuumed
twice.
1. Switch on Trilobite, press to change
the programme and confirm by pressing
.
2. Use until “Spot” is displayed and
confirm by pressing .
3. Put Trilobite in the centre of the area to
be vacuumed and start vacuuming by
pressing .
Do not under any circumstances
vacuum liquids or lit or glowing objects, e.g.
cigarette butts.
NOTE! Vacuuming can always be interrup-
ted by pressing
. After this, pressing
recommences vacuuming, while
pressing will call up the menu.