Ecom Instruments ECOM-EF24F2G - Manual (Page 18)

10
Fig. 3-1 Fastening the brackets on the switch
Fig. 3-2 Attaching the Switch to a 19-inch rack
Desktop Installation
ECOM-ES24F2G Fast Ethernet Switch has four rubber pads attached on each corner of its
underside. These pads serve as cushionings against vibration and prevent the switch from sliding off
its position. They also allow adequate ventilation space when you place the switch on top of another
device.
Fig. 3-3 Desktop installation
• The location you choose to install your switch and the way you configure your network
may greatly affect its performance.
Installation Site Preparation
You can mount ECOM-ES24F2G Fast Ethernet Switch either on desktop or on a 19-inch rack. If
you plan to mount the switch on desktop, please choose a steady, level surface in a well-ventilated
area that is free from excessive dust. In any case, the installation site chosen for your switch has to
comply with the following requirements:
• The surface where you want to mount the switch must be able to sustain at least 2.7 kg.
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0