Maintenance, Operating instructions – Sealey SBS35 User Manual
Page 4
5. MAINTENANCE
WARNING! Disconnect sander from mains power supply before changing accessories, servicing or
performing maintenance. Replace or repair damaged parts. Use recommended parts only.
Unauthorised parts may be dangerous and will invalidate the warranty.
5.1
Clean the underside of the sander after use. Use an air line to blow dust out from around the motor by
passing the air through the ventilation holes.
5.2
Change belts when required.
5.3
Check brushes after every 200 hours of use. To do so remove the screws at end of the motor cover
and remove the tip of the cover (fig.3A), remove the brass brush holder electrical connection, remove
the brush holder and examine the carbon bush. Change brushes when they are only 5mm in length.
Ensure the unit is correctly re-assembled.
5.4
All other service and maintenance must be carried out by an authorised service agent.
5.5
When not in use store in a safe, dry, childproof location.
4.1
After completing steps in section 3 make sure that the sander is at the lowest speed setting and plug
it into the mains power supply.
4.2
Hold in the trigger safety lock in and squeeze the trigger (fig.3B), adjust the speed with the scroll
switch (fig.3E)
4.3
When finished release the trigger to stop the sander,
4.4
To change sanding belt, push the lever (fig.2B, fig.3D) forward, this will shorten the length of the arm
and loosen the sanding belt. Slide the old belt off and replace with the same size belt. Pull the lever
(fig.2B, fig.3D) back to tighten the belt. To change the arm and belt repeat from 3.1 ”PREPARING FOR
USE”
4. OPERATING INSTRUCTIONS
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
SBS35 Issue:3(SP)-
09/12/13
© Jack Sealey Limited