Fig.2 fig.1, Fig.3, Preparing for use – Sealey SBS35 User Manual

Page 3

3.1

Attach one of the three assorted arms (fig.1), do this by taking the spring provided and placing it into

the circular recess on the grinders fixed arm.

3.2

Fit the arm as in fig.2, insert and tighten the thumb screw (fig.2C) through the arm and adjust as

necessary to make a straight fit.

3.3

Push the arm retraction lever (fig.2B, fig.3D) forward, this will shorten the length of the arm to make it

easier to apply a sanding belt, pull the lever back to tighten the belt.

3.4

Attach the dust collector to the exhaust (fig.3C) squeeze the two metal hooks together, this will enlarge

the rim of the dust bag to fit over the exhaust.

3. PREPARING FOR USE

fig.2

fig.1

Original Language Version

SBS35 Issue:3(SP)-

09/12/13

fig.3