Maintenance – Sealey HS104K User Manual
Page 3
NOTE: Unplug gun from power supply and allow to cool before performing any maintenance.
5.1.
Keep the air intake and outlet openings clean and free from dirt and peelings.
5.2.
Use only a slightly dampened cloth and mild household cleaning agent to wipe the gun clean.
DO NOT use turpentine, paint thinner, gasoline or similar substances to clean the gun.
5.3.
Check the gun, power lead and nozzles for damage before storage.
5.4.
Store the gun in a safe, dry, childproof area.
4.2.3
Hold the gun nozzle 75mm to 100mm from the paint to be removed.
4.2.4.
After a short time the paint will soften and begin to blister.
4.2.5.
DO NOT overheat the paint as this will cause it to burn, making it more difficult to remove. Wear eye protection, especially
when stripping paint from overhead. If lead paint is being removed, refer to the warning in section 1.
4.2.6.
Begin scraping the paint off. Work from top to bottom. Use the scraper with smooth even strokes, heating the surface in
front
of the scraper by moving the gun slightly from side to side.
4.2.7.
If the correct temperature has been applied to the paint, thick, even layers can be removed in a single pass (paint should be
removed in strips equal in width to the scraper blade). Scrape paint as soon as it becomes soft, as it will re-harden very quickly.
4.2.8.
Keep the scraper blade edge clean and sharp to prevent paint peelings from building up.
4.2.9.
After softening, shaped or profiled surfaces may be stripped by using a wire brush.
4.2.10. to protect surrounding surfaces from the heat, cover with a non-flammable material.
IMPORTANT: DO NOT concentrate the hot air gun on glass, as the glass may crack.
4.2.11. Allow the gun to cool before attempting to change nozzles.
4.2.12. After use, switch the gun off and unplug from the power supply. Allow to cool - stand the gun on the flat surface at the back
with the nozzle facing upwards, in a safe location, as it will remain very hot for a period of time.
5. MAINTENANCE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7Ar
www.sealey.co.uk
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
HS104K.V2 Issue: 2(l) - 23/03/15
Original Language Version
© Jack Sealey limited