Sealey PC477 - Manual (Page 3)

Cleaner will not operate.
Dust comes from the motor cover.
Reduced efficiency and increased
motor speed/vibration.
No power supply.
Faulty power cable, switch or motor.
Container full of liquid.
Filter missing or damaged.
Filter clogged.
Nozzle, hose or bin inlet blocked.
Check supply.
Check and repair or replace faulty item.
Empty container.
Fit or replace.
Replace or clean filter.
Check nozzle, hose and bin inlet for blockage.
6. TROUBLESHOOTING
5.1 Cleaning
NOTE: If the suction is weak, remove the paper or
fabric filter and remove the dust by hand-
patting the filter.
5.1.1 Remove the vacuum cleaner head to
access the filter. Refer to Fig. 12.
5.1.2 Remove all dust on the filter. Clean and if
necessary air-dry the filter for further use.
5.2 Emptying the Tank
5.2.1 Position the cleaner next to a suitable
container or drain. Lock tank onto frame as
shown in fig.4. Put the rear wheel locks
on. Hold the frame handle with one hand
and lift the tank to the emptying position
using the tank handle. Refer to Fig. 13.
5. CLEANING AND MAINTENANCE
Fig.10
Fig.9 Fig.11
Fig.12 Fig.13
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version PC455, PC477, PC455AK1, PC477AK1 Issue: 3 - 17/11/10